Blogs
Contact Us
Tel: 86-512-53640771
Fax: 86-512-53640769
E-mail：sales@alumag.com.cn(Domestic sales)
export@alumag.com.cn(Export)
Web:http://www.alumag.com.cn/
Address: No. 9, Xingang East Road, Liujiagang, Fuqiao Town, Taicang City, Jiangsu Province, China
Information List
How to Lubricate Linear aluminum extrusion rail
Release time:
2022-05-07 13:35
Source:
If a linear aluminum extrusion rail is used in an application, it must be ensured that it has a good lubricating function. If the lubricating effect cannot be achieved, the rolling speed will be severely worn, thereby affecting the work efficiency and reducing the service life. So, in order to increase productivity, how should linear aluminum extrusion rail be lubricated?
1. In the selection of lubricants, we must choose according to practicality. The effect of some lubricants is to reduce friction and prevent their exchange, and the effect of some lubricants is to reduce the surface stress between the rolling surfaces and prolong the There are also some lubricants that can prevent the surface from rusting and fully improve its use rate. Therefore, for different purposes, it is necessary to choose different lubricants. Common linear guide rails require relatively high lubricant requirements. Generally, a variety of conditions must be met at the same time. The required conditions are: high stability, high corrosion resistance, high resistance to corrosion. High wear resistance, low friction, and high oil film strength.
2. According to the type of lubricating oil, it is also divided into grease lubrication and oil lubrication. Grease lubrication is generally based on conditions and environments, and different greases are selected. Under normal circumstances, every 100 kilometers of work, grease lubrication needs to be replenished. Oil lubrication requires that the linear guides be coated with anti-rust oil, and only the linear guides coated with anti-rust oil can be lubricated with oil.
3. It is worth noting that in a very low temperature environment, the lubricating oil will often be washed away, thereby reducing the lubricity of the linear aluminum extrusion rail. Therefore, for places with low temperature, always pay attention to the degree of lubrication and lubricate it at any time. Increase the lubrication frequency and the amount of oil, so that the linear aluminum extrusion rail can be well maintained and maintained.
aluminum,extrusion,rail
Sweep the phone website
Contact Us
Tel: 86-512-53640771
Fax: 86-512-53640769
E-mail：sales@alumag.com.cn(Domestic sales)
export@alumag.com.cn(Export)
Web:http://www.alumag.com.cn/
Address: No. 9, Xingang East Road, Liujiagang, Fuqiao Town, Taicang City, Jiangsu Province, China