Blogs
Contact Us
Tel: 86-512-53640771
Fax: 86-512-53640769
E-mail：sales@alumag.com.cn(Domestic sales)
export@alumag.com.cn(Export)
Web:http://www.alumag.com.cn/
Address: No. 9, Xingang East Road, Liujiagang, Fuqiao Town, Taicang City, Jiangsu Province, China
Information List
Aluminum extrusion rails are installed like this
Release time:
2022-05-05 13:27
Source:
1. When we have done all the preparatory work before installation, it is time to start the official installation. First of all, slowly fit the parts of the linear aluminum extrusion rail. When installing and using, it is necessary to confirm whether the screw holes match. If the screw holes do not match, the stability will be deteriorated, and the impact on the accuracy and service life will also be relatively large. .
2. First of all, from far to near, slowly tighten the positioning screws of the slide rail in order to make the rail and the vertical installation surface slowly fit the vertical reference plane and tighten slightly, then we will increase the locking strength to make the main rail Fully fit with the lateral reference plane.
3. When using special tools to lock the aluminum extrusion rail, the action should be slower, and then install the cage and rolling elements (rollers, rollers, needles) according to the corresponding positions, and finally we continue to use the same installation method to install The auxiliary rail is enough, after tightening the screws, you are done. After the installation is completed, first check whether the aluminum extrusion rail is running smoothly and whether there is any other noise. If there are other noises, we should immediately stop the movement of the aluminum extrusion guide, and unload the aluminum extrusion rail to check whether there are foreign objects.
Then the above is the installation method of the linear aluminum extrusion rail. It should be noted that during the installation process, do not directly touch the aluminum extrusion guide. Especially in the hot summer, the anti-rust layer on the surface of the aluminum extrusion rail will be damaged because of the sweat on the hands. Do not directly hit the aluminum extrusion guide rail pair with hard objects, and pay attention to the maintenance of the aluminum extrusion guide rail in daily life.
aluminum,extrusion,rail
Previous Page
Sweep the phone website
Contact Us
Tel: 86-512-53640771
Fax: 86-512-53640769
E-mail：sales@alumag.com.cn(Domestic sales)
export@alumag.com.cn(Export)
Web:http://www.alumag.com.cn/
Address: No. 9, Xingang East Road, Liujiagang, Fuqiao Town, Taicang City, Jiangsu Province, China