Blogs
Contact Us
Tel: 86-512-53640771
Fax: 86-512-53640769
E-mail：sales@alumag.com.cn(Domestic sales)
export@alumag.com.cn(Export)
Web:http://www.alumag.com.cn/
Address: No. 9, Xingang East Road, Liujiagang, Fuqiao Town, Taicang City, Jiangsu Province, China
Information List
Processing method of extruded aluminum t slot products
Release time:
2022-06-22 14:19
Source:
First, draw the rough extruded aluminum t slot products processing line on the end face and upper plane of the relevant cast iron plate, and then find the plate to be used for alignment and clamping.
Second, use a standard grooving knife to plan out a right-angle slot with appropriate strength. If the extruded aluminum t slot products are relatively small, then the precision requirements for the top right-angle slot will not be very high when the groove is processed. If the notch precision of the extruded aluminum t slot products is high, it must be roughly planed once and finely planed once to get a right-angle slot that meets the standard.
Third, plan the left and right grooves on the side, before processing extruded aluminum t slot products, you need to use a professional cast iron square or other methods to check whether the top surface of the relevant cast iron flat plate and the cutting edge of the elbow cutter we use are not remain vertical. If it is not vertical, be sure to adjust it to the vertical position, so that you can start to plan the groove on the side.
Fourth, chamfering is a key link in the processing of extruded aluminum t slot products. Two sharp-pointed planers with a main declination angle of 45 degrees are chamfered.
extruded,aluminum,t,slot,products
Sweep the phone website
Contact Us
Tel: 86-512-53640771
Fax: 86-512-53640769
E-mail：sales@alumag.com.cn(Domestic sales)
export@alumag.com.cn(Export)
Web:http://www.alumag.com.cn/
Address: No. 9, Xingang East Road, Liujiagang, Fuqiao Town, Taicang City, Jiangsu Province, China