Blogs
Contact Us
Tel: 86-512-53640771
Fax: 86-512-53640769
E-mail：sales@alumag.com.cn(Domestic sales)
export@alumag.com.cn(Export)
Web:http://www.alumag.com.cn/
Address: No. 9, Xingang East Road, Liujiagang, Fuqiao Town, Taicang City, Jiangsu Province, China
Information List
Installation steps of quality aluminium heat sink on sales
Release time:
2021-11-15 10:41
Source:
Do you know the installation steps of quality aluminium heat sink on sales? Let's take a look at it briefly!
1. Please unpack the quality aluminium heat sink on sales first, and install the air release valve and union first.
2.The position of the hole for installing the special hook can be drawn on the wall according to the provided installation drawing or related requirements.
3. When installing the quality aluminium heat sink on sales, consider the damage caused by the expansion and contraction of the heating pipe to the radiator.
4. Put the 12 expansion tube in and level it.
5. Please use a percussion drill to drill a hole of 12, the depth of which should be flush with the wall after the expansion tube is put in.
6. Install the bottom hook and tighten the screws after reaching the requirements.
7. Put the quality aluminium heat sink on sales on the hook that has been installed at the bottom, install the upper hook to adjust the position of the hook, and then tighten the expansion screw after it is clamped. When placing the radiator, place the air release valve on the top .
8. After installing and assembling the pipe joints, install the pipes and connect them with the water inlet and outlet according to the drawings, and fasten them everywhere. The rear side is 3.5cm away from the wall and 5cm away from the kick line.
9. Please input hot water, open the air release valve, and release air until water comes out. The operating pressure of quality aluminium heat sink on sales shall not exceed 0.12Mpa listed in the manual.
The above is a brief introduction to the installation steps of quality aluminium heat sink on sales.
aluminium,heat,sink
Sweep the phone website
Contact Us
Tel: 86-512-53640771
Fax: 86-512-53640769
E-mail：sales@alumag.com.cn(Domestic sales)
export@alumag.com.cn(Export)
Web:http://www.alumag.com.cn/
Address: No. 9, Xingang East Road, Liujiagang, Fuqiao Town, Taicang City, Jiangsu Province, China