Blogs
Contact Us
Tel: 86-512-53640771
Fax: 86-512-53640769
E-mail：sales@alumag.com.cn(Domestic sales)
export@alumag.com.cn(Export)
Web:http://www.alumag.com.cn/
Address: No. 9, Xingang East Road, Liujiagang, Fuqiao Town, Taicang City, Jiangsu Province, China
Information List
How to improve the application characteristics of aluminum extrusion cnc products
Release time:
2022-07-07 15:21
Source:
Nowadays, aluminum extrusion cnc products are indispensable machinery and equipment for the production and processing of many commodities. With the rapid development of industrial production, the high efficiency of aluminum extrusion cnc products can be further improved, thereby creating higher economic benefits. It means that the work efficiency is improved first, which means that the first step is to improve the solution of sewage, so that it does not dissolve dirt and harm the characteristics of machinery and equipment, and secondly, the working pressure in cold aluminum extrusion cnc products is further improved, which is generally maintained by pressurized water pumps.
In order to maintain the quality of the equipment, the efficiency must be improved according to the reduction of the repair rate of the machinery and equipment, and the work must be cleaned on time. On the other hand, the improvement of the working efficiency of the cold aluminum extrusion cnc products can also be improved according to the total area of the fluid To carry out, then be sure to change the original channel pipe to raise the diameter of the pipe, the original series of products hoses are replaced in series, which can increase the water flow into the cooling tower, reasonably reduce the temperature of oil and organic waste gas, and improve the high efficiency of machinery and equipment.
Aluminum extrusion cnc products The cooling of the extrusion tube is optional. When the extrusion tube is generally dark red during the production process, it can be cooled evenly, and its temperature is not easy to rise. When using cermet alloy molds, cooling water should not be used to avoid cracking of the mold holes. When the cooling water extrudes the surface of the molding material tube, the cooling must be uniform. After cooling, the surface layer adhering to the air oxide skin must be removed. , to ensure the quality of the extruded product surface.
aluminum,extrusion,cnc,products
Previous Page
Sweep the phone website
Contact Us
Tel: 86-512-53640771
Fax: 86-512-53640769
E-mail：sales@alumag.com.cn(Domestic sales)
export@alumag.com.cn(Export)
Web:http://www.alumag.com.cn/
Address: No. 9, Xingang East Road, Liujiagang, Fuqiao Town, Taicang City, Jiangsu Province, China